3D Printer parts made with FibreTuff

FDM or SLS 3D Printer can produce bone like cadaver models

FibreTuff Medical Grade compounds can be 3D Printed

FibreTuff ® is an advanced biomaterial compound for 3D Printing.  The FibreTuff  has anisotropic behavior which has greater strength in one direction. The FibreTuff has a surface texture, as well as appearance similar to bone like cadaver models.



3D Printing Service Center for FibreTuff Compounds

FibreTuff Medical Grade filament can be 3D Printed with Ultimaker S5

If you need 3D Printer Parts made with FibreTuff, established Service and Design Center are located throughout the US.


Viscus Biologics - Cleveland OH

website www.viscusbiologics.com


DelRay Systems - Rochester Hills, MI

website https://www.3d-printer.com


nScrypt  - Orlando, Florida

website  www.nscrypt.com


3D Lifeprints - London

website www.3dlifeprints.com

FibreTuff is 3D printer agnostic

FibreTuff Medical Grade filament is 3D printer agnostic.

FibreTuff  is 3D Printer agnostic,  less expensive thermoplastic composition made with cellulose versus the other highly engineered resins for 3D Printer filament . Savings can be in excess of 30 to 40% with improved performance. 

3D Printed skull caps produced with FibreTuff

3D Printed skull cap made with FibreTuff

FibreTuff biomaterials can produce bone like skull caps for functional models used by medical centers and physicians. FibreTuff PAPC II was processed on 3D Printer to make these skull caps.

An advanced 3D Printer filament "FibreTuff"

FibreTuff compounds for medical electronics

3D Printed cylinder made with FibreTuff having a electronic circuit

FibreTuff compounds for capacitive touch applications.See 3D Printer nScrypt Utilizes FibreTuff's PEEK Alternative PAPC 3D Printing Filaments 

GeckoTek build plate works well with FibreTuff

FibreTuff will need a heated build plate

FibreTuff requires a heated build plate on a 3D Printer. Utilizing EZ-STIK GeckoTek build plate with 225C nozzle temperature and heated bed at 95C with PAPC II is preferred.  https://www.geckotek.co/collections/build-plates/products/ez-stik-hot-build-plate

Glue to increase bed adhesion with FibreTuff filament

FibreTuff will need an adhesive for sticking to heated build plate

To adhere the FibreTuff to a 3D Printer heated bed - PVA water soluble breakaway, a glue stick or adhesive sheet is required. Magigoo is a preferred adhesive https://magigoo.comCube Glue from 3D Systems is a good choice for increasing bed adhesion with FibreTuff.

3D Printing FibreTuff filaments will require adhesive to heated bed

FibreTuff can use PVA water soluble for break away.

All FibreTuff biomaterials for FDM 3D Printer require a heated bed.  The heated bed temperatures recommended for the FibreTuff I can range from 80 C to 110 C. 

3D Printer Parts made with FibreTuff PAPC

image16
image17
image18
image19

FibreTuff 3D Printer filament Data Sheets / Processing Infor